Exhibitions 2026 Read more >

From surface treatment to integrated production: more than 18 years of precision for KTM

How Mifa contributes to the performance of KTM motorcycles through specialist surface treatment, process control and integrated production

  • Fons Timmermans Fons Timmermans Manager Surface Treatment
  • Rachel Waisapy Rachel Waisapy Marketing and Communications Manager
4 min

A high-quality component takes more than an accurately produced aluminium profile. Tribological properties also play an important role in the functionality, wear resistance and service life of the end product.

Mifa and KTM have been working together since 2007 on the production and surface treatment of aluminium outer tubes for motorcycle front forks. What began as a specific surface treatment challenge has grown into a long-term partnership centred on engineering, innovation and process control. Mifa has now produced and treated more than 4.5 million outer tubes for KTM.

From surface treatment to integrated production

The partnership between Mifa and KTM began with the surface treatment of aluminium outer tubes. At the time, production took place on a manual production line. The reason for the collaboration was a capacity and quality problem at another supplier. Mifa started by treating the outer tubes in the colour anthracite, a colour that was technically challenging to achieve consistently at the time. But at Mifa, we believed we could make it work.

As KTM grew, so did the partnership with Mifa. In addition to surface treatment, Mifa eventually also took over production of the outer tubes. This created an integrated production process: from extruding the aluminium profile to CNC machining and the final surface treatment.

Get in touch now

The technical challenge: combining wear resistance and surface roughness

Hard anodising was used for the original application. This process offers high wear resistance but also results in relatively high surface roughness. For the KTM outer tubes, this resulted in a surface roughness (Ra) of approximately 0.35 µm. The customer’s requirement was considerably lower. To meet this requirement, an additional mechanical finishing step was necessary: honing.

Although honing achieved the desired surface roughness, this extra processing step also brought drawbacks. The process was time-consuming and led to higher production costs. The challenge, therefore, was to combine the required wear resistance with a considerably lower surface roughness, without the need for additional mechanical processing.

The solution: the development of GlissCoat 2083

To solve this challenge, Mifa developed the GlissCoat 2083 surface treatment process. This process combines the required wear resistance with low surface roughness. As a result, the additional honing step could be eliminated entirely.

The result: a more efficient production process, fewer processing steps and a solution that matches the specific functional requirements of the application.

GlissCoat 2083 has now proven itself over many years. Not only for applications within shock absorbers, but also for other components where a combination of wear resistance and low surface roughness is essential.

Process control as the basis for scalable production

As KTM grew, so did its production needs. To support this growth, Mifa has invested in a fully automatic process line for surface treatment. A high degree of process control is central to this line. Especially with large production volumes, it is essential that the surface treatment is reproducible and consistently meets the specified quality requirements. By combining the various production steps, Mifa can control the entire process: from aluminium extrusion and CNC machining to surface treatment.

This integrated approach provides control over the production process and makes it possible to align quality and production capacity.

Looking for a partner for aluminium precision extrusion?

Are you working on a profile with specific requirements for dimensional accuracy, material or production capacity?

Mifa helps engineers from the first design steps through to series production. With expertise in aluminium precision extrusion, CNC machining and surface treatment, we offer integrated solutions for complex aluminium components.

Find out what is possible for your application.